Hydrogen Technology

All technologies related to the production and use of hydrogen come under hydrogen technology. Hydrogen technology is being used in many areas or maybe. Some hydrogen technologies are carbon neutral and can play an important role in preventing climate change and the establishment of a future hydrogen economy.
Mudwatt Micro fuel cell (Dirt Battery) is a device that converts organic matter found in the soil into electricity by using bacteria.
Here I will tell you how to make a Microbial Fuel Cell (MFC) Using Mud, how can we create a Microbial fuel cell by ourselves with any Mudwatt Science Kit.
Materials needed to make Mudwatt:

• Mudwatt core, classic, DeepDig
• Mud
• One container (if you are using the core kit)

HOW MUDWATT WORKS:
Mudwatt is a fun educational science kit that naturally uses micro-organisms found in the soil to make electricity. These microbes are so small that we can not see them with their eyes, their body thickness is one-tenth of their thickness, which is also found in all types of soil and plants.
There are also many species of these bacteria which emit electrons in the outer environment with breathing.
From Mudwatt, these micro-organisms can use two conductive graphite discs such as anode and cathode (Cathode).
An anode is placed in the middle of the soil where electrogenic microbes develop, whereas the cathode is placed above it, where the oxygen exposes from the air.
Step 1: Making Mud -
Take 3-4 handfuls of mud from any swamp. The soil should be wet but not very thin.
Option: You can add some other nutrients in the soil such as Mudwatt packaging, shredded paper or waste food.
Step 2: Making Electrodes -
Give the two wires at 90 degrees, peel the wire straighten the anode to the colored wire and make the cathode of the second color wire. Now wear gloves in hand, insert the bare part of the anode wire into the side of the thin felt disc and insert the cathode wire into a thickly felt disc.
Step3: Assembling -
First, make a minimum of 1-centimeter thick clay sheet on the lower surface of the container. Now put the anode over the clay sheet and press it lightly, this will bring some air bubbles out of it.
Now fill the container with a 5 cm thick clay sheet and press it lightly. Let it stay for some time now and if possible, remove the water from that container, through any medium. Now place the cathode on the soil comfortably, not pressing it in the soil.
Step 4: Closing circuit -
1. Launch your gloves and add the Hacker board.
By turning the cathode wire, add the '+' sign of the hacker board and the anode wire to the '-' sign.
What is the Hacker Board?
You can also buy hacker board circuits from the market. This low current (which meets the mudwatt and converts the low voltage to the short burst of higher current and higher voltage, now you can connect it to an LED, for which you have to use the capacitor up to 10uF. After that, you will see that when the Mudwatt creates a healthy environment with microbes, the LED burn will begin.